TURO advantages 

• Non clogging
  The recessed TURO impeller permits an unobstructed passage through the pump casing, and this allows solids up to virtually the full diameter of the discharge port size to pass through without the danger of clogging. Long fibrous materials can also be handled without difficulty.
• Improved hydraulic efficiencies
  The TURO pump design incorporates an axial spiral in a concentric casing, this ensures that solids entrained in the flow are quickly discharged from the pump thereby reducing internal recirculation, which is detrimental to hydraulic efficiencies and pump wear life.
• Low attrition of medium
  Due to the natural flow of the fluid through the pump casing and the fact that the flow is virtually isolated from the impeller, fragile solids such as crystals, carbon and live cockles etc. can be passed through the pump with very little damage. Ideally suited for low shear applications.
• Simple design
  The hydraulic centering of the impeller in the casing and its simple open design results in very little radial loadings on shaft and bearings. Even under extreme conditions when wear occurs on the impeller, it is concentric and does not affect the mechanical balance of the TURO pump.
• Low running costs
  Due to the improved hydraulic efficiencies of the TURO pumps, they absorb less power than other designs of vortex pumps. The gentle pumping action also contributes to improved wear life of component parts.
• Reliability
  The robust and simple design together with correctly chosen materials guarantees a long service life. Time has proven that TURO pumps require very few spare parts when com- pared with other makes of pumps.
• Standardized programme
  Because of a maximum interchangeability of parts in different pump sizes and designs, spares can be reduced to the absolute minimum.

The TURO-Vortex pumps have the benefit of EGGER's 45 years experience in solids handling applications. The experience is reflected in todays designs.

The TURO pump is a single stage end suction, radially split casing pump, with centre-line discharge, incorporating the back pull-out feature.

Separately mounted pump feet allow the discharge to be positioned 90° either side of the pump centre-line. It also permits the use of one standard pump casing for all different pump designs